How To Use Paint Sprayer Properly?

A paint sprayer is a device that, if well equipped, automatically applies paint to anything like walls, cars, and any other thing. It is quite difficult for you to hook up the sprayer and start painting. You require a little practice and knowledge on how to use paint sprayer properly.

In this article, you will learn how to use a paint sprayer properly, and the technical skills you require to be perfect. Preparations on how to use a paint sprayer are also essential before you start any painting job, such as checking the temperatures and having the protective gear in place.

Moreover, you will be able to learn where to use the paint sprayers and where not to use them. However, this might sound cheesy, but it is essential to avoid wastage of paint on small surfaces, to ensure also there is proper management of the paint sprayer for a long time working. Easy steps also explained to understand how to use a paint sprayer properly in this document.

Where should you use a paint sprayer?

  • On painting furniture, because sprayers will help reach spots that are hard to reach with a paintbrush
  • Use a paint sprayer to paint large areas and rooms.
  • When painting an empty house or hall
  • Use on painting walls and ceilings.

Where should you not use a paint sprayer?

  • On carrying out simple painting jobs that can be done by a brush paint
  • When you have little paint because paint sprayers use much more makeup than brushes and rollers
  • If you are not ready to carry out a preparation work before using the paint sprayer
  • If you cannot take the efficient cleaning of the paint sprayer, this is because it needs time to clean the sprayer.

Preparation work of a paint sprayer

Preparation work on how to use a paint sprayer is crucial and done before the beginning of any painting job.

1) Temperature check

The optimal temperature for a paint sprayer is within 45-75 degrees centigrade. You should check the temperature to ensure it is neither too cold nor too hot. If the temperature is too cold, the spray gun is likely to block. If it is too hot, the paint inside dries too fast and not bond to the surface.

2) Wear protective gears

The protective gears include goggles, gloves, a face mask, and overall to deal with the paints and fumes.

3) Use drop cloths and sheeting

Sprayers might cause a big mess while spraying the paints. You should ensure that you have all the areas not being painted, such as doors and windows covered with plastic sheeting or using drop cloths.

4) Move furniture and rugs

All the furniture and rugs moved out of the working room to create a working space. You can move everything to the middle of the office if you have limited space, and cover them with plastic sheeting. Beneficially, this will ensure that there is no staining of your belongings with spray splashes from the sprayer.

Steps on how to use a paint sprayer

Step 1

Stir the paint well fast and strain to remove any debris because the debris cause clogging of the sprayer gun.

Step 2

Carry out a test run with cardboard and start by moving the gun in long and straight strokes. The distance between the spray gun and the surface painted should always be the same, about 10-12 inches, whenever you are decorating. Try to move your body as you are painting rather than the arm alone for effectiveness and avoid straining the arm.

Step 3

Once you now feel confident enough in painting techniques, you can now move to the real surface. During spraying, it is advisable to work slowly, and in 1-foot width space. The paint sprayer supplies too much paint, so when you rush the painting, you end up with uneven coats.

Furthermore, it would be best if you extended between spaces to avoid the light line spots from occurring. Also, avoid tilting the paint sprayer either upwards or downwards; this leads to the non-uniform application of the paint because of spitting.

Step 4

At the corners, it is recommendable to spray quickly than on the ordinarily flat surface, and vertically to avoid excessive loading of the corner area.

Step 5

Step backward to check the work after a few sections. In case of any light spots, you can fill using a paint roller or brush. Furthermore, you can carry out a back brushing to provide an even finishing on the surface.

Step 6

Carefully clean your paint sprayer every time after using it. You might find some paint sprayers with an easy flush feature that enables you to connect to a hosepipe and easily clean it up. However, paint sprayers are different. Therefore, you can carefully follow the instructions on how to clean the particular model of paint sprayer you have to improve its life span

Conclusion

Whenever you want how to use a paint sprayer for the painting job, you should always understand the preparations that come before any operation. It would help if you did not paint when the air temperature is lower than 45 degrees centigrade or more than 75 degrees centigrade, and also do not spray the paint in direct sunlight.

The hot temperatures dry paint fast with no proper bonding, too cold temperatures, however, causes the colors to dry slowly, attract dust and dirt, and the gun might block easily.

After completing every section, it is recommendable to stand back and look for any missed spots on the surface. Also, keep the paint brushes and rollers available for any touch-up after spray-paint. Although some paint sprayers need back-rolling and back brushing to obtain an even coating and good penetration. You should, therefore, back brush the covers to have a precise, better finishing.

1 thought on “How To Use Paint Sprayer Properly?”

Leave a Comment