How To Install Vinyl Plank floors?

When you are making the decision to pick the flooring material of your home, you will notice that many different options are available to consider. Out of those different options, vinyl plank floors have received a lot of attention.

If you can take a look at the reviews about different flooring options on the internet, you will notice that most of the people have appreciated what they will be able to get out of the vinyl plank.

This is something impressive and you should never think twice before you move forward with it. You will never regret about the experiences that you will come across upon you get plank floors installed at your property as well. They can provide maximum protection to you in the long run along with enhanced usability. In other words, people who get plank floors are capable of receiving maximum possible returns out of money that they spend.

What Exactly Are Vinyl Plank floors?

Before you proceed, you need to understand what exactly the vinyl plank is all about. plank floors can be considered as ta thin flooring material.

In fact, they are thin when compared to wood, ceramic tile, and other flooring options available for you to consider. Hence, you don’t need to go ahead with any under laments while using them. You can even get plank floors installed on top of your existing floor.

Since the plank floors are thin, you will be able to get the job done easily without raising the existing floor that you have at home. This can deliver a better experience to all the people who are willing to go ahead with home remodeling projects.

You will still need to make sure that you are installing plank floors on a smooth surface. Then you will be able to get the best outcomes from them.

Are The reasons Available for You To Get Vinyl Plank floors At Your Home?

Numerous reasons are available for you to think about getting plank floors installed at home. Here are some of the most prominent benefits out of them.

They are Water-Resistant

The plank floors are water-resistant. In other words, water is not in a position to create any damage to these floors. Therefore, you don’t need to worry too much about maintenance.

You can even use your wet mop to get the cleaning work done. Therefore, you can reduce the time and effort that you are spending to clean your house as well.

Affordable

You don’t need to spend a lot of money to purchase plank floors as well. They are one of the most affordable flooring materials available in the market for you to purchase. You can buy these flooring materials and move forward with receiving the maximum possible results out of your investment. This will make you feel good about the investment that you did as well.

Easy To Install

At the time of buying plank floors, you will be impressed with the convenience that you can experience with installation as well. That’s because vinyl plank comes to you in the form of planks and tiles. Therefore, you will be able to get the job done on your own. You don’t always need to seek the assistance of an expert to get these installed at home.

Soft and Pliable

The plank floors are designed to provide you with a softer experience to you at all times. You will be amazed at this softness delivered to you as well. In addition to that, it is pliable. Hence, you will be able to get an effective cleaning experience out of them at all times. You will be able to receive a high level of flexibility out of them as well.

Lasts Longer

At the time of getting a flooring material, you need to analyze the return that you are getting out of your investment. This is where you should pay extra attention towards vinyl floors. The plank floors are designed to last for a long period of time. Therefore, you will be able to make sure that you are getting maximum return from your investment out of them as well.

Easy To Cut

You will find it an easy task to cut vinyl plank at the time of installing. This is one of the biggest factors, which have contributed towards the ease of installation that you can experience at the end of the day. You don’t need to purchase any noise and expensive saws to cut them. Due to a lack of thickness, you can get the cutting job done on your own.

You Don’t Need Any Expensive Tools

Last but not least, you can keep the peace of mind while you use vinyl floors. That’s because no expensive tools are needed to get the job done. This will provide homeowners with the chance to proceed with the installation work on their own.

How To Install Vinyl floors

Now you are aware about all the reasons available for you to think about moving forward with plank floors. Along with that, you must carefully follow the steps to get the installation job done as well.

Here is the step by step instructions available for you to follow and get the installation of vinyl plank done. Any person can follow these steps and end up with amazing outcomes at the end of the day.

Make Sure That You are Starting With a Smooth Surface

You must start the job from a smooth surface. That’s because a smooth surface is needed to get the job done with installing plank floors at your home. If there are any high spots, you will not be able to get the job done correctly. That’s why it is important to stick to a smooth surface at all times.

Begin With a Half Plank

The installation process of plank floors can be started with a half plank. If needed, you can go ahead with more as well. However, a half plank is recommended for the beginners who wish to proceed with the job and end up with positive results at all times. Then you will be able to figure out the way on how to install vinyl plank.

You need to layout these planks in parallel to the longer walls that you have at home. In fact, you will have to do it in a similar way to the installation of hardwood flooring. You just need to make sure that you are selecting the appropriate sizes of planks to get the job done.

Undercut The Doorjambs

You need to pay special attention towards the process of undercutting the door jambs. Then you will be able to proceed with the installation. You can use an oscillating multi-tool to get this undercutting job done while ensuring quality results at the end of the day.

Make Sure That You are Leaving an Expansion Gap

You must also think about leaving an expansion gap while you are trying to get the installation job done. In fact, you will need to insert shims, so that you can create gaps. The plank floors that you install will be subjected to changes in temperature.

In fact, they can contract and relax along with changes in temperature. Therefore, you need to make sure that you are leaving enough space for an expansion gap. These gaps should be left along the walls.

Snap all The Planks Together

Once you are done with placing all the planks, you can proceed to the next stage, where you snap all the planks together. This should be done carefully.

In fact, you need to join one end of a plank to the previous plank and make sure that you continue down the side of it. Then you should snap it to the previous one and move forward.

You need to make sure that the planks that you have in the very first row are initially snapped together. This is where you should slide the tongue of the very first plank into the second row. Then you should lay and angle it along with the floor.

Likewise, you can proceed. You will need to lock them together so that you can ensure proper stability. If you can follow these steps, you will be able to get the installation job done while ensuring the best results at all times.

Tap in all The Stubborn Planks

While you move forward with the installation of plank floors, you will come across stubborn planks as well. This is where you should be careful to tap them in. A hammer will be able to assist you with getting the job done here.

Once you install the planks, you need to double-check and see whether they are providing a smooth surface to you at all times. You should be able to touch the surface and see.

There shouldn’t be any inconsistencies visible in the planks as well. If you can find any inconsistencies, you need to go ahead and tap into all of them. The hammer will be able to help you with getting the job done.

Even if you have any issues, you need to pull the planks and install them again. In addition to that, you need to ensure that the planks are shimming against the wall. This will help you to make sure that you are not losing the expansion gap as well.

Install Shoe Molding

Now you have done most of the work related to plank floors installation. Therefore, you should proceed with the installation of show molding. Here, show molding will be able to deliver assistance to you with overcoming the gap that exists between the base trim and flooring.

This is where you should think about getting your hands on 1 ¼ inch nails. Then you will be able to finish the nails through show into the base of your trim. While you do it, you need to make sure that you are not pinning the flooring down.

You need to make sure that you are molding them to match perfectly well with the trim that you are ending up with. This can help you secure better returns at all times as well.

Finishing The Job

By this step, you have got the job done successfully on your own. Hence, you should go through the final finishing work and close the job. This is where you should replace all the baseboards. Along with that, you should add additional trim pieces and transitions as well. In case if you prefer to go ahead with shoe molding, you should be using them.

You must double-check and make sure that you have installed all the nails. Then you will be able to complete the job and experience all the benefits that are linked with getting plank floors as we stated above.

Final Words

As you can see in this article, getting vinyl plank floors is something that you will be able to do on your own. You don’t need to contact an expert or a professional service provider to get the job done. You just need to follow these steps and make sure that you are doing it.

1 thought on “How To Install Vinyl Plank floors?”

Leave a Comment